Видео

Amazing thank you

Fantastic! Thanks! 🎸😀

Perfect!

Pretty sure nothing regarding the drain or connections in this video will meet US Building Code standards.

hello i have just replaced a bathroom fan with one that is pull cord and only and has a live and neutral connection. i have brown , black and grey wires. i have connected the brown to the live and the grey to neutral but the fan does not work ? i am wondering if the fan is faulty . i have not checked the wiring with a circuit tester but it was working before i removed the old fan ! do you have any suggestions please?

Awesome 😎 this also saved me some headaches...

Looks like you pushed the wrench to the left. Counterclockwise. No?

Lifesaver... just fixed this exact problem with this simple and effective solution.. thank you

These videos are fantastic, are you able to do a video explaining inspection & testing?

what is the "ring cable"?

Thank you! Great video

Can you please tell us the section of the wires in mm in this job?

Stop music disturbance

получается отпиленная закруглённая деталь с торцов ничем не обработанная и там голый мдф? ну это же не есть хорошо.

How on earth do you unclip them ?

Hi can I add fcu from fcu as the other spur socket is going out to the garden. Thanks

Is there any difference between rating a cable in mm or mm2?

hi, can we use 3 amp fuse? 3*230=690 votage

Brilliant video, thank you very much. NOTE: Make sure you buy the right mitre box for your coving e.g. if your coving is 127mm but the width of your mitre box is 120mm..... your coving will not fit together, even just a 2mm difference and it still won't fit. It took me a long time to figure out that I was cutting correctly but I was using the wrong nitre box.

He didn't just butcher the door with the chisel because "you wont see it anyway" like most would, very careful and precise with the chisel, respect mate!

Incorrect Title. This is a dual RCD consumer unit, not dual split consumer unit.

Thankyou, I had to watch 3 videos to get to yours, which was actually helpful

I have spent extra time in the market to buy the best hob brand, on march 2023, I bought AEG 90cm hk955070xb after six months the color of the right side eye later on one week i found that its cracked, the local seller confirm that its miss use!! I don't know how color change and self cracked is miss use!!?? I wondered how AEG seller try to escape from manufacturing deficiency responsibility. I wondered how AEG seller dont aware of two years warranty, every thing all image zero. great lesson i have from this brand

Excellent video. Thank you.

Clear, concise,no stupid music, great stuff, thankyou

In the UK the colour code change live Red = brown, neutral black = Blue, and earth green = yellow and green stripe, so when using three core cable it would make more sense to connect the black and blue together and use the grey as the signal wire.

Hi that was nice and slow , I can now wire my place , but will probably wire radial for sockets , thanks

Non electricians "live, neutral, earth" Us electricians "line, neutral, cpc" 😂

Good video but worth mentiioning the bonding cpc has to be a minimum of 10mm. Also, it needs to be attached to a gas or water pipe within 600mm(60cm) and before the first elbow or bend in the pipe

Well done. Very clear and easy to follow.

nice rage bait

Great video! If the immesrsion heater has two 3kw elements I guess you just repeat this process for the second?

The first 20 seconds are the most useful, demonstrating how the cutty thing goes into the black box with slits. Had a nightmare figuring that out before watching this video.

Thanks for this video. It was really helpful 👍

What about the plug

W ell done mate, you certainly know your stuff. Brill’.👍

Another tip: There should be a slight slope/angle. Triple check you got the UP/TOP side in the UP/TOP position.

This video helped me the ptfe tape method helped me thanks soo much

Why don't we just use brown and black, red and blue (L/N) and the grey as the switch wire? Then all you have to do is leave grey as an industry standard for a switched live or drop a red sleeve over it.

60mm??? The plastic boss is 56mm and the 2" to 40mm adapter will fall thru that hole

Really helpful. I can now add more sockets to the bedroom via a FCU for the home office.

i have 1 gang 2 way switches and going to replace one of the switches to a dimmer switch , when connecting wires do you connect live swtch wire in L2 and brown wire in com

Absolute legend. Cheers

good video thanks

Can these be added on top of existing tiles or would I have to remove the tiles first?

I've been draining radiators for years...never thought of using bags to catch the water...brilliant! Thank you.

عمل جيد

No subtitles 😕

Brilliant video. Thank you. Perfect presentation and length

At 7:24 the blue wire that goes to the switch L1 terminal needs to have a brown sleeve. 🙂